 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
This shows a comparison of voltage discharges and the length of the discharge time. The battery conditioned with Nanopulser discharges for a longer amount of time which means a larger capacity.
[40B19L] "JIS standard" battery was used.
Note: The test was done with 12V Nanopulser without auto-stop feature.
In order to evaluate the effect of Nanopulser on a sulfated battery, changes in specific gravity after charging and discharging were monitored for five cycles. It clearly showed a gradual improvement in specific gravity after each cycle.
*Test Protocol and Specification
• |
Battery: 38B19L Shin Kobe 12V starter battery |
• |
Charge and discharge current and duration: |
Five hour (300 min.) of charging at 5.6A. |
|
Discharge at - 5.6A down to 10.5V. |
|
• |
Temperature is at 25 degree C, (+) (-) 5 degree C. |
• |
Humidity is at 55%, (+) (-) 10%. |
• |
One sulfated battery was used for the test. |
 |
 |
 |
 |
 |
